考虑禁飞区的高超声速飞行器再入跟踪控制

为确立高超声速飞行器再入精确模型,参考NASA的研究数据对动力学方程中的气动参数进行拟合。基于飞行器结构的相关性质及战略应用背景,加入热流密度、动压、过载和禁飞区等参考约束的限制,融合成强非线性、复杂耦合的最优控制问题。采用改进自适应伪谱法求解模型所构建的微分方程组,通过设置自适应网格细化与配点,使单位时间内状态变量和控制变量波动过大的时间区间被进一步细划,并利用SNOPT求解器解算出符合条件的最优轨迹。设计闭环控制器,实现对最优轨迹的姿态变化的跟踪,测试系统的性能并进行评估。仿真结果表明:整个再入过程中,飞行器速度下降过程偏于平稳,再入轨迹可以满足约束条件,在避开禁飞区的同时取得最大横向航程;三通道角速度收敛可控,对姿态的跟踪较理想,控制器基本可以实现精确调姿。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

反应性树脂体系化学增黏和物理减黏机制的分离

采用等温差示扫描量热(DSC)法,研究了CTD-128环氧树脂与GA-327(DDM改性芳胺)的固化度-时间变化关系;采用AR2000EX型旋转流变仪,测试了上述体系的等温黏度-时间关系.比较等温条件下的固化度-时间关系和黏度-时间关系,建立了等温条件下的黏度-固化度的等时对应关系,结果表明在纯化学增黏机制影响下,树脂体系的黏度随固化度增加先缓慢增加,当固化度增大到一定程度后黏度快速增加.将等温条件下的黏度-固化度关系进行变换,得到恒定固化度下的黏度-温度关系,揭示了在物理减黏机制影响下,树脂体系黏度随温度的增加而降低,并且黏度降低幅度随固化度的增加而增大.两种黏度影响机制分离的实现,为反应性树脂体系实时黏度的准确预测提供了技术支持.     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

带有模糊干扰观测器的高超声速飞行器一体化制导控制方法

为充分利用高超声速飞行器在俯冲段的质心运动与绕质心运动之间的耦合作用和飞行过程中的不确定性,基于模糊干扰观测器提出三维一体化制导与控制问题。根据飞行器的动力学方程以及飞行器-目标的视线角相对运动方程,推导出适用于倾斜转弯控制的一体化制导控制模型。针对模型中的不确定性采用模糊干扰观测器进行补偿,并使用块动态面方法设计一种一体化制导控制律。通过选取适当的李雅普诺夫函数证明闭环系统状态的一致毕竟有界性。仿真结果验证了该一体化制导控制方法的有效性和鲁棒性。     

型号研制与产品数据管理

介绍了产品数据管理(PDM)的概念和基本功能,结合当前型号研制的特点和计算机信息技术应用的状况、发展,研究了型号研制产品数据管理的需求、功能及实施,为当前型号研制依靠CIMS技术实现产品数据管理提出了8条基本原则。     

Does Military Spending Nonlinearly Affect Economic Growth in South Africa?

Using annual data collected from 1988 to 2015, this study provides evidence of a non-linear relationship between military spending, economic growth and other growth determinants for the South African economy. The empirical study is based on estimates of a logistic smooth transition regression (LSTR) model and our empirical results point to an inverted U-shaped relationship between military spending and economic growth for the data. Furthermore, our empirical results suggest that the current levels of military spending, as a component of total government expenditure, are too high in the South African economy and need to be transferred towards more productive non-military expenditure in order to improve the performance of economic growth and other growth determinants.     

无源RFID系统中推断式二进制搜索算法

在现有的RFID标准中，一般标签ID都由几个不同含义区间组成。针对这种特点，提出推断式二进制防碰撞算法：在识别每个区间段的ID时，利用某个特定读写器中的前缀库推断该区间段各个位的取值，以便减少待识别标签ID的位数。同时，通过调整参数u，可以对系统可靠性进行控制。仿真实验表明，在没有新前缀出现的情况下，推断式二进制防碰撞算法能够将QT算法的识别速度提高3倍、标签平均响应次数降低3／4。